Magma DM10-016NG User Manual download pdf (Page 9)

LEAK TEST

• Do not use an open flame to check for leaks.

• Do not remove valve orifices.

• Do not smoke during testing.

• Do not test indoors. Always test outdoors in a well-ventilated area.

• Test for leaks each time the propane canister is replaced.

• Use a solution of mild soap (liquid dish soap works well) and water for testing

TEST PROCEDURE

1. Visually inspect all hoses before each use. If there is

excessive abrasion, wear, or cutting, replace the

hoses before further use. Replace defective hoses

only with those specified

by the manufacturer.

2. Be sure that the valve

is in the off position.

3. Be sure that the natural

gas delivery hose is correctly

and securely connected.

4. Using a small paint brush, spread

a thin coating of the soap/water

solution onto the following

connections:

Residential Gas Supply

Natural Gas Supply Hose

Gas Supply Hose - Valve Inlet

Valve Outlet - Gas Delivery Hose

5. If the soap/water solution bubbles

there is a leak. Immediately

disconnect the gas supply and check

connections. Reconnect the gas

supply and repeat the test.

6. If the soap/water solution continues

to bubble, remove the gas supply

hose and replace the defective parts

before using grill.

Burner

Inspection Panel

Oriface

Venturi Tube

Gas Delivery Hose

Valve

Gas Supply Hose

Natural Gas Inlet

Access Panel

Natural Gas

Supply Hose

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments

Magma DM10-016NG User Manual Page 9

Comments to this Manuals

Related products and manuals for Barbecues & grills Magma DM10-016NG