Magma DM10-016NG User Manual download pdf (Page 15)

TROUBLE SHOOTING GUIDE

15

Problem

Burner will not light

with igniter

Burner will not light

even with match

Flame goes out

Flare-up

Yellow sooty flame

Possible Cause

Igniter electrode covered with

grease or residue

Igniter/electrode wire loose or

disconnected

Wire is shorted causing spark

from wire before electrode

No spark being generated

Electrode protection cap is not

covering the igniter electrode

No gas flow

Obstructed gas flow

Disconnected gas supply hose

High or gusting winds

Flame on low setting and lid

is closed or opened too quickly

Excessive cooking temperature

Grease and/residue build-up

Excessive fat in meats

Excessive oils in marinades

Excessive cooking temperature

Obstruction of gas flow

Possible Solution

Clean igniter electrode

Check connection and reconnect

Replace igniter wire

Replace valve assembly

Position burner so electrode

protection cap is directly above

electrode

Check fuel supply

Clean venturi tube and burner

Reconnect gas supply hose

Place grill out of windy area if

possible. Turn front of grill

away from the wind

Relight and close or open lid

more slowly

Reduce flame level

Clean components

Trim fat from cuts of meat

before grilling

Use non-oil based marinades

Reduce flame level

Check and clean venturi tube

and burner. Check gas supply

line connection

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments